SPC Performance Performance Parts Canada

Use this fixed change shim to adjust rear toe on the Fiat 500 -.38deg. Need camber change too? Stack a camber shim with this toe shim. See camber shims 71781-71784. Do you see a lot of Fiat 500s?...

SPC Performance 12-20 Tesla Model S / 16-20 Tesla Model X Adjustable Rear Upper Control Arms

Get +-3deg of camber adjustment on your late model BMW or Mini with this rear camber arm from SPC. Whether you need to improve tire life, add aggressive camber settings for the track, or just want a...

Replace the rear camber and toe links on your S550 Mustang with SPC's forged aluminum adjustable links and be confident you will have the most change and lightest weight, with uncompromised strength...

Upgrade your rear suspension for added toe adjustment and reduced weight vs the OE link with this adjustable aluminum control arm from SPC. This lower arm features a xAxis sealed flex joint that...

Extend your toe adjustment range on the rear of many popular Honda models. SPC's extended toe cam kit will allow you to get a full +-2.5deg of toe change. This cam bolt features a hex chromate free...

Get ready for the track with this four (4) arm set of adjustable upper links for the Audi B9 platform. This kit has four arms so you can change camber and caster +-1.5deg on both sides. xAxis sealed...

The upper control arm ball joint pinch bolt on the popular Audi A4 and A5 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt and nut replacement...

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

This sleeve will easily change Camber and/or Caster 2.00° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

This sleeve will easily change Camber and/or Caster 2.00° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

This sleeve will easily change Camber and/or Caster 2.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

This sleeve will easily change Camber and/or Caster 2.50° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...